RenewablePress.com

Renewable Energy - Press Center

fotolia 73444491 1280 256

Press Release

Publisher: Nordex SE

Nordex Group receives type certificate for the N149/4.0-4.5 turbine from TÜV SÜD

Hamburg (renewablepress) - The independent certifying agency TÜV SÜD Industrie Service GmbH has awarded the worldwide valid IEC type certificate for the N149/4.0-4.5 turbine from the Delta4000 series.

The type certificate officially confirms that the theoretical design calculations for the N149/4.0-4.5 done by the Nordex Group reflect the figures for the turbines actually measured in the field. This is in fact a confirmation of the power performance and mechanical loads during operation as well as the lifetime of the turbine type under different operating modes. Likewise the NR74.5 rotor blade was successfully certified for a lifetime of minimum 20 years on the basis of a dynamic, physical rotor blade test.

The certification is based on a comprehensive measuring and validation programme over the past twelve months with the N149/4.0-4.5 turbines installed in summer 2018. TÜV SÜD had already issued the "Statement of Compliance for the Design Evaluation" for this turbine type in September 2018. This design evaluation was one of the first preconditions for issuing the present type certificate.

Another part of the type certification, apart from the validation, comprises the evaluation of the manufacture and production of the wind turbines. Nordex and its component suppliers for the N149/4.0-4.5 have set up a certified quality management system in accordance with ISO 9001:2015. Inspections of manufacture by the certifying agent served to confirm the quality-compliant production of the components and the wind turbine in line with the certified design documents. The next steps will involve the production processes in the other production facilities.

The IEC type certificate for the N149/4.0-4.5 covers the turbine options with hub heights of 105, 120, 125, 135, 145, 155 and 164 metres both for steel, concrete and hybrid tower versions. The NR74.5 rotor blade is also certified with the anti-icing solution.

In addition to this, the independent test labs WIND-consult and engineering office for acoustics Busch have measured the sound levels of the N149/4.0-4.5 in the wind farm. Here, among other things, sound power levels of 106.1 dB(A) at a power output of 4,500 kW and a lower figure of 96.5 dB(A) at a power output of 2,870 kW were confirmed. In other words, even at sound-critical sites these measurement results facilitate receiving operating permission for night-time operation for the N149/4.0-4.5. Continuous operation will then result in correspondingly high yields.


The Nordex Group - a profile

The Group has installed more than 25 GW of wind energy capacity in over 40 markets and in 2018 generated revenues of around EUR 2.5 billion. The company currently has more than 5,500 employees. The joint manufacturing capacity includes factories in Germany, Spain, Brazil, the United States, India, Argentina and Mexico. The product portfolio is focused on onshore turbines in the 2.4 to 5.X MW class, which are tailor-made for the market requirements in countries with limited space and regions with limited grid capacity.


Download press photo:
https://www.iwrpressedienst.de/bild/nordex/b1fdf_N149-picture.JPG
© Nordex SE


Hamburg, 29 August 2019


Publication and Reprint free of charge; please send a voucher copy to Nordex SE.



Attention editorial offices - For further questions please contact:


Media contact:
Nordex SE
Felix Losada
Phone: +49 (0)40-30030–1000
E-Mail: flosada@nordex-online.com


Contact for investors:
Nordex SE
Felix Zander
Phone: +49 (0)40-30030–1000
E-Mail: fzander@nordex-online.com


Nordex SE
Langenhorner Chaussee 600
22419 Hamburg

Internet: http://www.nordex-online.com



Online press kit - all press releases from Nordex SE


Press photos for editorial use only
Note: For the content of this press release the issuer / publisher of the release is »Nordex SE« responsible.

More press releases from Nordex SE


About Nordex SE

The Nordex Group is one of the world's leading suppliers of wind turbines. The principal focus is on units with a high capacity - above all in the megawatt range: the strongest growth segment in the sector. Under the brand names Nordex, we offer powerful wind turbines for almost all geographic regions across the globe. Onshore and offshore, for desert and permafrost areas. With the largest serial produced wind turbine family in the world (N80/2500 kW, N90/2500 kW, N100/2500 kW and N117/2400 kW) and the powerful megawatt turbines N77/1500 kW and N82/1500 kW, Nordex is able to offer high-efficiency wind turbines for onshore use. The Nordex N150/6000 kW Offshore rounds off our megawatt product family with a machine especially designed for offshore use.
Today more than 4,500 Nordex wind turbines with a total rated output of more than 6,500 megawatts are already rotating in 30 countries of the world. We are represented with offices and subsidiaries in 19 countries.

http://www.nordex-online.com



Press contact at Nordex SE

Felix Losada
Mail: flosada@nordex-online.com
Phone: +49 - (40) - 300 30 - 1141