Publisher: Nordex SE
Ever higher for greater yields: Nordex installing the world
• Total height of just under 230 metres
• Global premiere for 164-metre hybrid tower
Hamburg (renewablepress) - Nordex has installed the world’s tallest wind turbine to date in Hausbay in the German state of Rhineland-Palatinate. With a hub height of 164 metres and a rotor length of 65.5 metres, the N131/3300 wind power system reaches a total height of just under 230 metres.
Located roughly 100 kilometres west of Frankfurt/Main, the “Hausbay-Bickenbach” wind park has been developed by Kreuzberger & Spengler Regenerative Energie from Dunningen-Seedorf.
The 164-metre hybrid tower is made of a 100-metre concrete tower and two tubular steel tower segments. Over the last few years, this design has been used for over 500 Nordex N117 and N131 wind power systems with a total of height of up to 200 metres. Consequently, this enhanced version incorporates considerable practical experience.
With a total height of just under 230 metres and a lower blade tip height of 100 metres, the N131/3300 will be able to make use of air layers offering a greater yield, thus increasing annual output. At the same time, it is exposed to less turbulence in hilly and forest-rich terrain. Certified in accordance with Dibt (German Institute for Building Technology) guideline 2012 for wind zone S, the turbine is particularly designed for low-wind regions with wind speeds of an annual average of up to 7.5 m/s.
Type testing for the N131/3300 with a hub height of 164 metres was completed in January of this year. Noise emission and measurement reports for the 3 MW and the 3.3 MM version of the N131 are also available.
The “Hasbay-Bickenbach” project uses a 100-metre concrete tower supplied by long-standing Nordex partner Max Bögl for the first time. As a leading producer of prefabricated parts, the group has been building combined prestressed/steel hybrid towers since 2010. Production of the 3.80-metre tall elements with a uniform wall thickness of 30 centimetres at the company’s own facilities ensures consistently high quality and precision of the components, enabling the hybrid tower to be assembled within two weeks.
Download press photos:
About the N131/3300
The N131/3300 is a new version of the N131/3000 from the Generation Delta range. With a rotor diameter of 131 metres and a nominal output ten percent higher than that of the N131/3000, it can boost yields by between four and six percent depending on the location. Via the N131/3300, Nordex is thus completing the next systematic step towards its own goal of additionally reducing the cost of energy achieved by its turbines. As well as this, larger hub heights permit additional yield gains: The N131/3300 is available on a hybrid tower with a hub height of 134 metres or 164 metres. It has a guaranteed noise emission level of a low 104.5 dB(A) – even in yield-optimised operations without the use of any acoustic assistance.
About Kreuzberger & Spengler Regenerative Energie
Kreuzberger & Spengler is an independent family-owned company established by Ulrich Kreuzberger and Bernd Spengler in Dunningen-Seedorf in the Black Forest, Germany. The mid-sized owner-run company has been executing wind farm projects and assembling and operating wind farms for over 17 years. K&S is following the trend in favour of larger hub heights and has found in Nordex a capable partner for this and future projects.
About Max Bögl
As one of the leading producers of hybrid towers with large hub heights, the Max Bögl Group possesses extensive expertise along the entire process chain - starting with the construction of the foundation and the concrete tower and steel tower including indoor installation as well as in project planning and management and repowering. The hybrid wind power towers made from prestressed concrete and steel are engineered internally and produced at facilities in Sengenthal and Osterrönfeld in Germany with a capacity of 500 units per year, offering substantially greater efficiency and energy yields in non-coastal locations. To date, Max Bögl has successfully installed over 1,100 hybrid towers for its customers.
The Group has installed wind power capacity of more than 18 GW in over 25 markets. In 2015, Nordex and Acciona Windpower recorded combined sales of EUR 3.4 billion. The Company currently has over 4,800 employees. The production network comprises plants in Germany, Spain, Brazil, the United States and soon also India. The product range primarily concentrates on onshore turbines in the 1.5 - 3MW class addressing the requirements of developed as well as emerging markets.
Hamburg, 28 June 2016
Publication and Reprint free of charge; please send a voucher copy to Nordex SE.
Attention editorial offices: For further questions please contact
Telephone: +49-40-300 30 – 1000
Langenhorner Chaussee 600
Online press kit - all press releases from Nordex SE
Press photos for editorial use only
Note: For the content of this press release the issuer / publisher of the release is »Nordex SE« responsible.
More press releases from Nordex SE
- Nordex Group repeats annual order intake of more than 6 gigawatts in financial year 2020
- The Nordex Group has obtained accreditation in Brazil for the N163/5.X wind turbine model from BNDES
- Swedish utility Jämtkraft and Persson Invest awarded Nordex Group an order for 131 MW in December 2020
- End of 2020 the Nordex Group received a major order for 518 MW from Statkraft in Brazil
- Nordex SE announces change in management board
- wpd has placed an order with the Nordex Group for 188 MW in Finland
- Nordex Group receives IEC type certification for N149/5.X turbine from TÜV SÜD
- Nordex Group's new concrete tower plant in Spain starts operation
- The Nordex Group optimizes annual energy production of legacy turbines with vortex generators
- Nordex Group extends production capacity to 6 GW and increases production and sales
About Nordex SE
The development, manufacture, project management and servicing of wind turbines in the onshore segment has been the core competence and passion of the Nordex Group and its more than 7,900 employees worldwide since 1985. As one of the world's largest wind turbine manufacturers, the Nordex Group offers high-yield, cost-efficient wind turbines under the Acciona Windpower and Nordex brands that enable long-term and economical power generation from wind energy in all geographical and climatic conditions.
The focus is on turbines in the 3 to 5MW+ class, and the Group’s comprehensive product portfolio offers individual solutions for both markets with limited space and regions with limited grid capacities. With more than 29 GW of installed capacity worldwide, Nordex Group systems deliver sustainable energy throughout more than 80 per cent of the world’s energy market (excluding China).
Nordex SE is listed on the TecDAX of the Frankfurt Stock Exchange. The management holding company is headquartered in Rostock, while the executive board and administrative offices are based in Hamburg. At production facilities in Germany, Spain, Brazil, the US, and India, the Nordex Group produces its own nacelles, rotor blades and concrete towers. The Group also maintains offices and branches in more than 25 countries.
Press contact at Nordex SE
Phone: +49 - (40) - 300 30 - 1141