Publisher: Nordex SE
Entering the 5 MW class: Nordex Group announces new N149/5.X turbine
Powerful addition to the Delta4000 series presented in 2017Hamburg (renewablepress) - The Nordex Group is extending its product portfolio with a multi-megawatt machine in the 5 MW class. After the N149/4.0-4.5 and the N133/4.8, the new N149/5.X is the third turbine type in the Delta4000 series.
The N149/5.X is designed for moderate and light-wind areas and can also perform optimally at sites with complex requirements. Apart from the classic core markets in Europe, the target markets for the N149/5.X also cover global growth regions such as South Africa, Australia and South America.
The N149/5.X is designed for maximum flexibility and can be operated in different modes in the 5 MW range depending on site requirements and customer needs. This enables customers to individually configure the wind farm in terms of the output, capacity and lifetime of the turbine, as well as with regard to sound requirements, and thus adapt it ideally to the company's respective business model. The N149/5.X is a logical progression based on the successful approach of a flexible power range in the N149/4.0-4.5.
"Thanks to the proven technological basis of the Delta4000 product series we are in a position to continuously develop highly efficient solutions for different wind regimes and different geographical regions and to ensure short lead times for product launches. We have designed the N149/5.X with its maximum flexibility and efficiency to exactly meet the needs of our customers," says José Luis Blanco, CEO Nordex Group.
A new and highly efficient gearbox is used and the electrical system of the Delta4000 series scaled up in order to achieve the high power output in the 5 MW range. The efficient electrical system with its double-fed asynchronous generator, which has proved itself in the field for more than two decades, and the partial converter have been retained. The N149/5.X also uses the N149/4.0-4.5 rotor blade, which further increases the modularity of the Delta4000 product series. The exterior dimensions of the nacelle remain unchanged so that proven logistical and installation processes can be used as in the past.
The turbine is offered with a wide range of sound power modes in order ensure than even the most demanding noise requirements can be met. For instance, the turbine can be operated with a low sound power level of 104.8dB(A) while still achieving a power output of 5.5 MW. The machine can also be run in higher power modes at sites where sound emission levels are not critical.
Different tower options are offered for the N149/5.X - up to a height of 164 metres, depending on the market. The turbine options also include a cold-climate version for operation at temperatures down to -30° C as well as an anti-icing system for rotor blades.
The turbine is due to go into series production as of 2021.
At the European Wind Energy Conference WindEurope from 2 - 4 April 2019 in Bilbao, Spain, visitors will have the opportunity to obtain detailed information on the N149/5.X.
The Nordex Group - a profile
The Group has installed more than 25 GW of wind energy capacity in over 40 markets and in 2018 generated revenues of around EUR 2.5 billion. The company currently has more than 5,500 employees. The joint manufacturing capacity includes factories in Germany, Spain, Brazil, the United States, India and in the near future Argentina and Mexico. The product portfolio is focused on onshore turbines in the 2.4 to 5 MW class, which are tailor-made for the market requirements in countries with limited space and regions with limited grid capacity.
Download press photo:
© Nordex SE
Hamburg, 26 March 2019
Publication and Reprint free of charge; please send a voucher copy to Nordex SE.
Attention editorial offices - For further questions please contact:
Contact for investors:
Langenhorner Chaussee 600
Online press kit - all press releases from Nordex SE
Press photos for editorial use only
Note: For the content of this press release the issuer / publisher of the release is »Nordex SE« responsible.
More press releases from Nordex SE
- Nordex Group increases order intake to 6.2 gigawatts in 2019
- Ardian and OX2 switch to N149/5.X turbines at Swedish 286 MW Åndberg wind farm
- Nordex Group receives three new orders totalling 172 MW from the Netherlands
- Successful end-of-year business in Europe: Nordex Group receives orders for 308 MW
- Nordex Group scores in service: Customers extend service contracts for 150 MW in Uruguay and the US
- Nordex Group now manufacturing Delta4000 turbines in La Vall d’Uixó plant in Spain
- The Nordex Group to supply N149 turbines for an 86 MW project for Mainstream Renewable Power in Chile
- The Nordex Group wins a new contract for construction of a 62 MW wind farm in Turkey
- Nordex Group receives contracts for projects over 128 MW from Europe
- The Nordex Group receives order from Turkey for 77 MW
About Nordex SE
The Nordex Group is one of the world's leading suppliers of wind turbines. The principal focus is on units with a high capacity - above all in the megawatt range: the strongest growth segment in the sector. Under the brand names Nordex, we offer powerful wind turbines for almost all geographic regions across the globe. Onshore and offshore, for desert and permafrost areas. With the largest serial produced wind turbine family in the world (N80/2500 kW, N90/2500 kW, N100/2500 kW and N117/2400 kW) and the powerful megawatt turbines N77/1500 kW and N82/1500 kW, Nordex is able to offer high-efficiency wind turbines for onshore use. The Nordex N150/6000 kW Offshore rounds off our megawatt product family with a machine especially designed for offshore use.
Today more than 4,500 Nordex wind turbines with a total rated output of more than 6,500 megawatts are already rotating in 30 countries of the world. We are represented with offices and subsidiaries in 19 countries.
Press contact at Nordex SE
Phone: +49 - (40) - 300 30 - 1141