Publisher: Nordex SE
Giant of efficiency: VSB and Nordex Group commission 4.5 MW wind turbine
Hamburg, Pustleben, Dresden (renewablepress) - Project developer, VSB, and turbine manufacturer, the Nordex Group, today commissioned the 238.5 metre high N149/4.0-4.5 turbine in Pustleben, Thuringia, Germany. Due to its dimensions, the system is very profitable and sets standards in terms of cost-effectiveness, even at locations with medium wind speeds. The electricity generation costs of the plant are lower than those of lignite-fired power plants.
About 10 km south of the Harz, it proudly rises into the sky: the Nordex N149/4.0-4.5, with a total height of 238.5 metres, and rotor diameter of 149 metres. When planning the wind turbine, Katja Felkl, Project Developer at VSB Neue Energien Deutschland GmbH, brought all the threads together: "With the support of the community, we have found an optimal solution for citizens and locations. Roads and cable routes have also been planned in such a way that is optimal for local farmers. In addition, the N149/4.0-4.5 is not only one of the most modern and efficient onshore systems, the rotor blades also rotate on average only half as fast as those of smaller wind turbines.” Ronny Kunath, Head of Realisation at VSB, explains: “This contributes to a harmonious landscape and assists acceptance among the local residents."
Thanks to its height, the modern turbine can use higher-yielding air layers and optimally exploit the full potential of the medium wind location that is Pustleben. It has a nominal output of 4.5 MW at a wind speed of 11.5 metres per second. The optimal conditions for this turbine at exactly this location generate the highest possible annual energy yield, resulting in lower cost of energy production. As a result, the average electricity generation costs are falling and are therefore cheaper than those of lignite-fired power plants.
"With the N149 from Nordex, we are using a high-quality, state-of-the-art wind turbine, which, due to its dimensions, enables a significantly higher yield than smaller, older models. This enables us to make optimum use of wind energy at the site. Our project in Pustleben impressively proves that the development towards larger hub heights and rotor diameters makes it possible to operate wind turbines efficiently even at locations far from the coast, in central and southern Germany. This means that the conditions are in place for these regions to make an even stronger contribution to the energy transition," says Dr. Uwe Kaltenborn, Managing Director of VSB Neue Energien Deutschland GmbH.
A special feature of this system is the Ventur tower with octagonal ground plan, which is composed of precast concrete parts running conically to the height. At a height of about 104 meters, the steel tube tower segments are installed. The hybrid tower has a total combined hub height of 164 metres, upon which, the Nordex turbine nacelle type N149/4.0-4.5 sits. This new turbine will produce low-cost, clean electricity for approximately 3,800 households per year.
The wind turbine in the municipality of Mitteldorf complements the Wipperdorf wind farm, which VSB commissioned in 2017.
The VSB Group - a profile
VSB, headquartered in Dresden, Germany, is one of the leading full-service providers in the field of renewable energies. The core business lies in the international project development of wind and photovoltaic parks as well as their operational management, service and maintenance. Since 1996, VSB has built more than 600 wind energy and photovoltaic systems with around 916 megawatts of installed capacity and an investment volume of 1.3 billion Euros. The Group and its affiliates employ more than 300 people at 19 locations.
The Nordex Group - a profile
The Group has installed more than 25 GW of wind energy capacity in over 40 markets and in 2018 generated revenues of around EUR 2.5 billion. The company currently has more than 6,000 employees. The joint manufacturing capacity includes factories in Germany, Spain, Brazil, the United States, India, Argentina and Mexico. The product portfolio is focused on onshore turbines in the 2.4 to 5.X MW class, which are tailor-made for the market requirements in countries with limited space and regions with limited grid capacity.
Download press photo:
© VSB Holding GmbH / Nordex SE
Hamburg, Pustleben, Dresden, 04 September 2019
Publication and Reprint free of charge; please send a voucher copy to Nordex SE.
Attention editorial offices - For further questions please contact:
Phone: +49 (0)40-30030–1000
Contact for investors:
Phone: +49 (0)40-30030–1000
Langenhorner Chaussee 600
Online press kit - all press releases from Nordex SE
Press photos for editorial use only
Note: For the content of this press release the issuer / publisher of the release is »Nordex SE« responsible.
More press releases from Nordex SE
- Nordex Group now manufacturing Delta4000 turbines in La Vall d’Uixó plant in Spain
- The Nordex Group to supply N149 turbines for an 86 MW project for Mainstream Renewable Power in Chile
- The Nordex Group wins a new contract for construction of a 62 MW wind farm in Turkey
- Nordex Group receives contracts for projects over 128 MW from Europe
- The Nordex Group receives order from Turkey for 77 MW
- The Nordex Group wins 138 megawatt order from Mexico
- The Nordex Group continues its successful sales in Turkey with new orders totalling 248 MW
- Nordex confirms 2019 guidance
- The Nordex Group manufactures its 1000th concrete tower for its own wind turbines
- Nordex Group records incoming orders of 1.7 gigawatts in third quarter of 2019
About Nordex SE
The Nordex Group is one of the world's leading suppliers of wind turbines. The principal focus is on units with a high capacity - above all in the megawatt range: the strongest growth segment in the sector. Under the brand names Nordex, we offer powerful wind turbines for almost all geographic regions across the globe. Onshore and offshore, for desert and permafrost areas. With the largest serial produced wind turbine family in the world (N80/2500 kW, N90/2500 kW, N100/2500 kW and N117/2400 kW) and the powerful megawatt turbines N77/1500 kW and N82/1500 kW, Nordex is able to offer high-efficiency wind turbines for onshore use. The Nordex N150/6000 kW Offshore rounds off our megawatt product family with a machine especially designed for offshore use.
Today more than 4,500 Nordex wind turbines with a total rated output of more than 6,500 megawatts are already rotating in 30 countries of the world. We are represented with offices and subsidiaries in 19 countries.
Press contact at Nordex SE
Phone: +49 - (40) - 300 30 - 1141