RenewablePress.com

Renewable Energy - Press Center

fotolia 73444491 1280 256

Press Release

Publisher: delta energielösungen technischer anwendungen GmbH, FREQCON GmbH

Wind Energy and Consumption are Moving Closer Together


Wilhelmshaven / Rethem (renewablepress) - Most of the older wind turbines (WTGs) are fed with extremely low remuneration after the expiry of the remuneration under the EEG. It is therefore logical, if possible, to feed the electricity directly into adjacent consumption centers such as production plants. The catch is that the grid connection may have to be switched. From today’s grid operation in terms of grid stability, the requirement arises that the old WTGs must then also comply with the new grid connection rules like the country-specific „Network Code Requirements for Generators“ (NC RfG). 20 years ago, only the large power plants were responsible for grid security. The low feed-in capacities of the decentralized regenerative generators were taken off the grid in the event of any grid disturbance. The wind turbines only had to run with a maximum power factor, an externally controlled active and reactive power was not necessary. Also, the reactions to grid frequency changes were only the responsibility of the large power plants.

How can these old WTGs continue to be operated in a financially interesting way - in terms of sustainability? One solution could be to supply industrial customers directly, whose energy requirements can be covered in part by these WTGs. By eliminating procurement costs and grid fees, both sides, the producer and the consumer, can benefit.

The incentives to merge the two partners are high due to the difference between the residual remuneration of the depreciated wind turbine and the purchase price of the consumer. Why is this possibility not already being practiced everywhere? Even if the wind turbine newly connected to the reference customer wants to supply the plant, it is a new grid connection. This means that the current grid requirements must now also be met. delta energielösungen technischer anwendungen GmbH, as a planner for regenerative and decentralized energy in cooperation with FREQCON GmbH, the leading German manufacturer of frequency converters and control systems for renewable energy systems, has brought a concept to market readiness, which makes the old wind turbines fit for the new tasks.

"After the business management questions for a prototype had been clarified,“ says managing director Axel Hollmann of delta, "the more than 20 years of experience with old and new wind turbines helped me to describe the critical operating points. With the help of FREQCON - another long-standing player in the regenerative industry - we have now found clear interfaces to get a series product on the way."

"The grid services must be provided proportionally to the maximum amount of electricity that is fed into the grid“, reports Mr. Klosse, also managing director of delta. "We are able to adapt the different local requirements in order to find the optimum in specific cases."


“delta energy lösungen technischer anwendungen GmbH" is a company founded in 2019, which emerged after 17 years from a planning office for electrical medium and high voltage systems. Its employees combine expertise from various areas of renewable energies even before the introduction of the German Renewable Energy Sources Act. The employees have also been involved in the development of measurement and certification guidelines for years. Most recently, a short-circuit simulator for testing the grid stability of the latest generation of wind turbines was completed (FRT test system). The employees of the company see it as their duty to ensure a complete and secure supply by means of renewable energies.


FREQCON is a pioneer of modern converter technology introducing full-scale power converters for wind turbines to the market in the early 1990s. Power converter and control systems designed and manufactured by FREQCON allow efficient and reliable grid integration of renewable energy sources such as wind, solar and energy storage systems.

From kW to multi-MW system solutions from FREQCON are used both for grid-connected systems as well as island grid systems. Today over 45 GW of installed capacity rely on products and solutions designed and manufactured by FREQCON. The development and production of high-quality, reliable and innovative solutions is part of the quality principle of FREQCON GmbH.


Download press photo:
https://www.renewablepress.com/press-images/delta-energie/9faab_Freqcon-delta-Container.jpg
Caption: The Converter container from FREQCON is enclosed by a delta transformer-medium voltage-switchgear container.
© delta energielösungen technischer anwendungen GmbH / FREQCON GmbH


Wilhelmshaven / Rethem, 05 May 2020


Publication and Reprint free of charge; please send a voucher copy to delta energielösungen technischer anwendungen GmbH or FREQCON GmbH.



Attention editorial offices - For further questions please contact:

Media contacts:
delta energielösungen technischer anwendungen GmbH
Rainer Klosse
Tel: +49 (0)170 5466510
E-Mail: rainer.klosse@delta-energie.de

delta energielösungen technischer anwendungen GmbH
Blumenstr. 4
26382 Wilhelmshaven

Internet: http://www.delta-energie.de


FREQCON GmbH
Barbara Engel
Tel: +49 (0) 5165 291760-0
E-Mail: info@freqcon.com

FREQCON GmbH
Bürgerwiesenweg 5
27336 Rethem

Internet: https://www.freqcon.com



Online press kit - all press releases from delta energiel


Press photos for editorial use only
Note: For the content of this press release the issuer / publisher of the release is »delta energiel« responsible.

The press release "Wind Energy and Consumption are Moving Closer Together " von delta energiel is also available in the following languages:


More press releases from delta energielösungen technischer anwendungen GmbH