Publisher: Nordex SE
New rotor for the energy transition: Nordex Group presents the N175/6.X
- Wind turbine for medium and low-wind locations based on the proven Delta4000
© Nordex SEHamburg (renewablepress) - In order to be able to better meet the increasing demand for wind turbines expected by its customers in the coming years, the Nordex Group is expanding its turbine fleet with another highly efficient turbine of the Delta4000 series: the N175/6.X.
The new turbine uses the proven technical concepts of the Delta4000 series, such as the control system, the flexible rated power and large parts of the nacelle of the sister model, the N163/6.X, which has already been tested in the field. As a result, in addition to the highly efficient development process, already tested and existing suppliers and production capacities can also be used for the new turbine.
With its single-piece, newly designed 85.7-meter-long rotor blade, the N175/6.X achieves an above-average capacity factor. At typical low to medium-wind locations, the N175/6.X will achieve between 7 - 14 percent more yield compared to its predecessor models, the N163/5.X and N163/6.X. Due to the turbine’s larger rotor, this additional yield is achieved particularly during times of light wind speeds where the turbine produces up to 22 percent more energy than its predecessors. This is advantageous for operators, as electricity prices are usually higher during low-wind periods and the N175/6.X ensures high electricity production already at low wind speeds.
The N175/6.X will initially be offered with hub heights of between 112 and 179 meters, which enables the turbine to reach attractive wind speeds even in locations with typically light winds. The turbine is designed for an operating lifetime of 25 years, but in some site-specific circumstances can also be confirmed for up to 35. At a rated output of 6.22 MW, the maximum sound emission is 106 dB(A).
Nordex also offers a wide range of options for the N175/6.X in order to meet the diverse economic and permit requirements. Among other things, the turbine can be equipped with a bat module and on-demand night-time marking. In addition, and, like the other turbines of the Delta4000 series, it offers different operating modes for reduced sound emissions. A cold climate variant ensuring operation in environments of -30°C is also available.
The N175/6.X will be available worldwide, but Nordex expects the main demand to be in Europe, especially at the beginning of series production.
José Luis Blanco, CEO of the Nordex Group: "The global energy transition cannot succeed without onshore wind power. With its proven product range, the Nordex Group has been ideally positioned for years to provide the necessary technology for this. With today's introduction of the N175/6.X, we are making a further contribution to advancing the energy transition in the world and making new wind farm locations economically attractive."
It was only in May 2022 that the Nordex Group installed its world's first 6 MW N163/6.X turbine of the Delta4000 series as planned. Scheduled series production of the N175/6.X is scheduled for the end of 2024. Among other things, the nacelle will be produced at the company’s German production facility in Rostock.
Nordex Group at WindEnergy Hamburg: Hall B6, Stand No. B6.346
The Nordex Group - a profile
The Group has installed more than 41 GW of wind energy capacity in over 40 markets, and in 2021, generated revenues of EUR 5.4 billion. The company currently employs a workforce of approx. 9,000. The company’s joint manufacturing capacity includes factories in Germany, Spain, Brazil, the United States, India and Mexico. The product portfolio is focused on onshore turbines in the 4 to 6.X MW class, which are tailor-made for the market requirements of countries with limited space and regions with limited grid capacity.
Download press photos:
© Nordex SE
© Nordex SE
Hamburg, 15 September 2022
Publication and Reprint free of charge; please send a voucher copy to Nordex SE.
Attention editorial offices - For further questions please contact:
Phone: +49 (0)40-30030–1000
Contact for investors:
Phone: +49 (0)40-30030–1000
Langenhorner Chaussee 600
Online press kit - all press releases from Nordex SE
Press photos for editorial use only
Note: For the content of this press release the issuer / publisher of the release is »Nordex SE« responsible.
More press releases from Nordex SE
- Nordex Group supplied almost one third of newly commissioned onshore wind power capacity in Germany in 2022
- Nordex Group generates order intake of 6.3 GW in the fiscal year 2022
- Nordex Group receives order from SSE Renewables for more than 100 MW in Ireland
- Nordex Group obtains order for more than 200 MW in Canada
- Nordex Group receives order for 45 MW in Germany
- Nordex Group receives orders from Eksim for the N163/6.X covering more than 150 MW in Türkiye
- Nordex Group receives order to supply 94 MW to Brazil
- IWES and Nordex Group intensify collaboration in grid integration of wind turbine generators
- Nordex Group achieves sales of EUR 3.9bn along with solid order intake
- Landwind Group places 82 MW order in Germany with Nordex Group
About Nordex SE
The development, manufacture, project management and servicing of wind turbines in the onshore segment has been the core competence and passion of the Nordex Group and its more than 7,900 employees worldwide since 1985. As one of the world's largest wind turbine manufacturers, the Nordex Group offers high-yield, cost-efficient wind turbines under the Acciona Windpower and Nordex brands that enable long-term and economical power generation from wind energy in all geographical and climatic conditions.
The focus is on turbines in the 3 to 5MW+ class, and the Group’s comprehensive product portfolio offers individual solutions for both markets with limited space and regions with limited grid capacities. With more than 29 GW of installed capacity worldwide, Nordex Group systems deliver sustainable energy throughout more than 80 per cent of the world’s energy market (excluding China).
Nordex SE is listed on the TecDAX of the Frankfurt Stock Exchange. The management holding company is headquartered in Rostock, while the executive board and administrative offices are based in Hamburg. At production facilities in Germany, Spain, Brazil, the US, and India, the Nordex Group produces its own nacelles, rotor blades and concrete towers. The Group also maintains offices and branches in more than 25 countries.
Press contact at Nordex SE
Phone: +49 - (40) - 300 30 - 1141