RenewablePress.com

Renewable Energy - Press Center

fotolia 73444491 1280 256

Press Release

Publisher: ProfEC Ventus GmbH

ProfEC Ventus becomes member of international Measuring Network of Wind Energy Institutes

- Specialist for accredited wind measuring technology meets highest quality requirements


Oldenburg (renewablepress) - One cannot achieve more. This June, ProfEC Ventus GmbH became member of MEASNET, an international Measuring Network of Wind Energy Institutes. This means that on an international scale, the accredited testing and calibration laboratory meets the highest requirements for the calibration of anemometers as well as the increasing requirements from the market. These sensors are important instruments for wind measurements and reliable energy yield prognoses of wind farm projects.

After one year of intensive work ProfEC Ventus has successfully completed all stages and obtained the coveted membership. The Expert Board of Measuring Network of Wind Energy Institutes (MEASNET) decides who is admitted as a member. Some of the most renowned international measurement institutes are represented as member in the network, which lays down the most rigorous requirements for a variety of measurements in the area of wind energy. “Being admitted to the network is a great honour to us. This confirms that we are able to understand, capture and evaluate the behaviour of wind sensors,\" says Mathias Hölzer, Managing Director of ProfEC Ventus. Our highly precise calibration of the devices reduces uncertainties of wind measurements at the sites of planned wind farms. In order to become admitted to the network, the calibration laboratory had to answer profound questions, develop analysing procedures and provide evidence. \"For this, a detailed preparation beforehand had not always been possible,\" remarks Mr. Hölzer.

ProfEC Ventus is an independent, accredited wind energy consulting company acting as testing and calibration laboratory. It works according to the most recent norms, standards, guidelines and regulations of the International Electrical Commission (these also include the shortly published IEC FDIS 61400-12-1 Ed.2 08-2016), and has been accredited by the German Accreditation Body (DAkkS) according to ISO/IEC 17025. This is a mandatory prerequisite for companies to be admitted as a MEASNET member. \"The network determines even higher requirements for calibration laboratories. Thus we emphasize the quality of our work and promote our customers’ trust in our work,” says Mr. Hölzer. The portfolio of the Oldenburg-based experts also comprises accredited wind energy consulting services performed as testing laboratory, such as measurements and verifying of wind turbine power performance curves; Wind Resource and Energy Yield Assessments (including FGW TR6 Rev.9 compliance); Installation and Evaluation of Wind Measurements as well as Site Classification of Wind Turbines.

Operating on an international scale, the company is specialized in wind measurements for wind farms being developed and existing ones. It supplies necessary sensors and measurement systems, but also turnkey delivers worldwide completely equipped wind measurement masts at heights of up to 160 meters. The wind sensors are calibrated in a wind tunnel and then furnished with a MEASNET calibration certificate. This procedure has become necessary because anemometers (like wind vanes) measure within tolerances specified by the manufacturer when capturing the wind data. For this reason, the sensor behaviours are compared to the measurements of a reference device under pre-defined calibration conditions in a wind tunnel. This procedure ensures that the devices deliver usable and reproducible data.

It does make sense to apply calibrated measurement technology, as data from the measurement campaigns on site of a scheduled wind farm project, most of them lasting for one year, must be as precise as possible. They form the basis for wind and energy yield prognoses and often also for investment decisions involving millions of Euros. For this reason, tolerance-related variances in measuring have considerable consequences, as they lead to mistakes in evaluating the actual wind availability and may therefore affect the overall economic performance of a wind park. Often such measurements cannot be used for financing by banks, or only in a limited way. The energy yields forecasted for a concrete wind park result from the measurements on site and historic weather data, the sources of which must be valid and verifiable. “By aid of our calibrated measurement equipment we make sure that any uncertainties during measurement campaigns remain as low as possible. This has a positive impact on the financing and the required capital structure. Thus, there is a growing demand for calibrated sensors in the market, furnished with the MEASNET quality seal,” concludes Mr. Hölzer.

Downloads:

Picture 1:
- https://www.iwrpressedienst.de/bilddatenbank/ProfECVentus/Bildgross.png

Picture 2:
- https://www.iwrpressedienst.de/bilddatenbank/ProfECVentus/Windkanal.png

Membership Document:
- https://www.iwrpressedienst.de/bilddatenbank/ProfECVentus/MEASDOC.pdf


Oldenburg, 27 July 2016


Publication and Reprint free of charge; please send a voucher copy to ProfEC Ventus GmbH.


Attention editorial offices: For further questions please contact

Media contact:
Andreas Jansen
MSc Dipl-Ing BHons
t: +49 4421 209089-0
f: +49 4421 209089-9
@: info@profec-ventus.com


ProfEC Ventus GmbH
Im Ofenerfeld 23
D-26127 Oldenburg - Germany

url: http://www.profec-ventus.com



Online press kit - all press releases from DE282873896


Press photos for editorial use only
Note: For the content of this press release the issuer / publisher of the release is »DE282873896« responsible.

The press release "ProfEC Ventus becomes member of international Measuring Network of Wind Energy Institutes" von DE282873896 is also available in the following languages:


More press releases from ProfEC Ventus GmbH